Parts by Type

print This page

Yoke Shafts

Filters: VEHICLE CLASS = LD,
PART NUMBER SERIES PART TYPE SPLINE COUNT SPLINE DIA. SPLINE LENGTH C/L TO END END TO RADIUS JOINT ANGLE BOOT NOTES VEHICLE CLASS BRAND
3-82-981 1350 Staked 10 1.500 1.500 5.820 0.000 LD Spicer
3-82-271 1480 OSR 10 2.250 1.594 4.380 2.812 7 LD Spicer
2682-800 7260 ISR 15 0.980 0.675 4.500 3.000 Fits Mercury outdrives LD PTI
2-82-1731 1210 OSR 15/16 1.250 2.250 8.391 7.866 LD Spicer
10-82-21 1000 ISR 16 1.250 1.625 5.562 3.688 60 LD Spicer
1-82-21 1100 OSR 16 1.060 1.688 3.656 2.875 30 LD Spicer
2-82-211 1310 OSR 16 1.250 1.656 4.594 2.938 LD Spicer
2-82-51 1310 OSR 16 1.250 1.875 5.125 3.562 16 LD Spicer
2-82-41 1310 OSR 16 1.250 2.000 5.812 2.063 LD Spicer
2-82-11 1310 OSR 16 1.375 1.922 4.562 3.219 16 LD Spicer
2-82-641 1310 OSR 16 1.375 2.063 4.625 3.406 9 LD Spicer
2-82-21 1310 OSR 16 1.375 2.250 5.312 3.844 16 LD Spicer
2-82-58X 1310 OSR 16 1.375 2.500 7.062 5.190 LD Spicer
2-82-201X 1310 OSR 16 1.375 2.250 9.375 6.938 17 LD Spicer
2-82-861 1310 OSR 16 1.500 1.141 3.656 2.406 3 LD Spicer
3-82-971 1350 OSR 16 1.500 1.375 4.188 2.531 17 LD Spicer
3-82-71 1350 OSR 16 1.500 1.750 4.812 2.781 20 LD Spicer
3-82-61 1350 OSR 16 1.500 2.000 5.188 3.063 20 LD Spicer
3-82-1321 1350 OSR 16 1.500 2.000 5.844 3.781 LD Spicer
3-82-341 1350 OSR 16 1.500 2.000 6.406 4.344 20 LD Spicer
3-82-161 1350 OSR 16 1.500 2.500 6.531 4.406 9 LD Spicer
3-82-181 1350 OSR 16 1.500 2.500 6.812 4.688 9 LD Spicer
3-82-211 1350 OSR 16 1.500 2.500 7.250 5.125 9 LD Spicer
3-82-1191 1410 OSR 16 1.500 2.000 4.969 3.250 16 LD Spicer
3-82-1301 1410 OSR 16 1.500 2.000 5.406 3.312 LD Spicer
3-82-201 1410 OSR 16 1.500 2.500 6.312 4.470 16 LD Spicer
3-82-58X 1410 OSR 16 1.500 3.000 8.406 5.750 16 LD Spicer
3-82-268X 1410 OSR 16 1.500 3.000 8.969 6.281 LD Spicer
3-82-261 1410 OSR 16 1.750 1.438 4.547 2.672 9 LD Spicer
3-82-811 1410 OSR 16 1.750 1.438 5.406 3.531 9 LD Spicer
3-82-781 1410 OSR 16 1.750 3.000 6.340 4.410 LD Spicer
3-82-1121 1480 OSR 16 1.562 2.750 6.750 4.500 22 LD Spicer
4-82-601-2 1550 OSR 16 1.750 2.500 7.560 4.156 45 Active LD Spicer
4-82-601-1 1550 OSR 16 1.750 2.500 6.375 4.156 45 Inactive LD Spicer
4-82-371 1550 OSR 16 1.750 2.500 6.812 4.250 45 LD Spicer
4-82-411-7 1550 OSR 16 1.750 3.000 7.940 5.375 45 LD Spicer
4-82-411-1 1550 OSR 16 1.750 3.000 8.438 5.875 45 LD Spicer
4-82-401 1550 OSR 16 1.750 3.000 8.625 5.812 45 LD Spicer
4-82-561 1550 OSR 16 1.750 3.000 9.750 7.094 30 LD Spicer
4-82-211 1550 OSR 16 2.000 3.000 6.120 4.484 8 LD Spicer
4-82-191 1550 OSR 16 2.500 1.562 4.562 2.750 8 LD Spicer
4-82-201 1550 OSR 16 2.500 1.562 4.812 2.938 8 LD Spicer
4-82-621-1 1550 OSR 16 2.500 1.562 5.172 3.328 13 Active LD Spicer
4-82-621-3 1550 OSR 16 2.500 1.562 5.609 3.672 LD Spicer
4-82-621-4 1550 OSR 16 2.500 1.562 6.188 4.250 LD Spicer
4-82-621-2 1550 OSR 16 2.500 1.562 6.672 4.734 13 LD Spicer
1482-62 1451-22 OSR 16 1.063 3.000 6.385 4.250 Volvo LD PTI
3082-62 1300 OSR 16 1.375 3.650 7.310 5.750 3051-27 Volvo LD PTI
2682-801 7260 ISR 17 1.125 3.000 11.375 9.500 Fits Mercury outdrives LD PTI
3482-18 3451 OSR 18 1.470 5.125 8.500 6.000 This yoke shaft will not fit the OEM splined sleeve. Old PTI Sprinter style usage. LD PTI
2-82-1961 1330 OSR 23 3.000 4.140 8.250 5.550 mates with 2-55-278X sleeve, uses 212115X boot LD Spicer
1182-241 9951-22 Staked 24 0.972 1.693 5.130 3.272 N/A Infiniti Front Shafts, Staked joints LD PTI
1182-242 9951-22 Staked 24 0.972 1.575 4.461 3.265 N/A Infiniti Front Shafts LD PTI
1182-243S 1151-243 OSR 24 0.972 1.575 4.449 3.265 N/A Infiniti Front Shafts with snap rings LD PTI
1182-243L 1151-243 OSR 24 0.972 1.575 5.157 3.265 N/A Infiniti Front Shafts with snap rings, tip is pointed LD PTI
2182-272 1210 OSR 26/27 1.161 4.019 6.432 4.713 2716-497, 2715-285, 2714-612, 2182-272M Can only be used with 26/27 sleeves, machined for clearance on CB. LD PTI
3182-272 1310 OSR 26/27 1.161 4.060 6.750 5.250 2716-497, 2715-285, 2714-612 Can only be used with 26/27 sleeves LD PTI
2182-27 1210 OSR 27 1.161 4.019 6.432 4.713 2716-497, 2715-285, 2714-612 BMW Yoke shaft LD PTI
2782-272 1751 OSR 27 1.147 1.181 3.375 1.875 BMW Front Shaft LD PTI
3182-271 1310 OSR 27 1.161 4.060 6.750 5.250 2716-497, 2715-285, 2714-612 LD PTI
2782-271 1751 OSR 27 1.147 1.181 2.750 1.300 BMW Front Shaft LD PTI
P3-82-1161 1350 29 1.175 1.750 5.531 3.062 20 Dana Discontinued. This is a PTI version. LD PTI
2-82-871 1310 OSR 30 1.297 2.500 5.625 3.875 33 LD Spicer
3-82-1151-2 1350 OSR 30 1.302 2.219 6.590 5.430 LD Spicer
3182-311 1310 OSR 31 1.330 3.750 7.125 5.700 2718-628 1.378" (35mm) Bearing Surface LD PTI
3R82-322 3R ISR 31/32 1.375 3.500 11.500 5.250 Like 3R82-321 but with long neck LD AAM
3R82-321 3R ISR 32 1.375 3.350 7.810 5.910 N2112504, 3R18-321 Used on Auto Trac Transfer cases from 1998-2007.
Includes GM K-series 4x4s, Hummer H2 and GM-G Vans.
Boot also available, part N2112504. 		LD AAM
3182-32 1310 CV 32 1.378 3.500 9.500 7.500 3R18-321 CV conversion for GM Auto Trac
Used on GM front shafts		 LD PTI
N2-81-1181 1310 Flanged 32 1.378 3.500 0.000 6.380 3R18-321 PTI version is 3182-32. This part has a 2" Pilot and 3" BC. LD Neapco
40137666 1410 OSR 32 1.378 9.055 40123472 external splined shaft transmission yoke LD AAM
3182-322 1310 CV 32 1.378 3.500 10.250 5.875 GM Front Auto-Trac LD PTI
40006885 3R ISR 32 1.375 3.350 7.810 5.910 N2112504, 3R18-321 Auto Trac Transfer LD AAM
NOE-12-2657-A 1000 ISR N/A N/A N/A N/A N/A SOLID SHAFT WITH NO SLIP
4.540" CL-CL 		LD Neapco
NOE-12-2658-A 1000 ISR N/A N/A N/A N/A N/A SOLID SHAFT WITH NO SLIP
8.54" CL-CL
 LD Neapco
NOE-12-5244-A 1000 ISR N/A N/A N/A N/A N/A SOLID SHAFT WITH NO SLIP
1.690" CL-CL
 LD Neapco
NOE-12-5122-A 1000 ISR N/A N/A N/A N/A N/A SOLID SHAFT WITH NO SLIP
8.02" CL-CL
AXLE DIAMETER .750		 LD Neapco
NOE-12-5139-A 1000 ISR N/A N/A N/A N/A N/A SOLID SHAFT WITH NO SLIP
7.49" CL-CL
AXLE DIAMETER .937		 LD Neapco
NOE-12-5147-A 1000 ISR N/A N/A N/A N/A N/A SOLID SHAFT WITH NO SLIP
7.650" CL-CL
AXLE DIAMETER .937		 LD Neapco